labmatetools / 7.1 PANEL DESIGNER ● AUTO-SAVED · STAYS IN THIS BROWSER ALL TOOLS
FIG. 7.1 — LASER, FILTER, SPILL

Panel Designer

Lay your markers onto your own cytometer and see, before you stain, where every colour will spill.

PICK INSTRUMENT → ASSIGN FLUORS → CHECK SPILLOVER

01 — INSTRUMENT

02 — PANEL

#MARKEREXPRESSIONFLUORDYE 1–5 DETECTORRECEIVES (MAX)CHECKRemove
The fluor menu offers dyes this instrument can excite and detect — or add your own from the same menu. SUGGEST on an open row (or one to check) ranks a few dyes that fit the rest of the panel.

03 — SPECTRA EMISSION · NORMALISED

FIG. 7.1a — SHADED = DETECTORS IN USE · BLACK RULES = LASERS

04 — SPILLOVER, ESTIMATED % OF PRIMARY SIGNAL · ROW SPILLS INTO COLUMN

05 — SAVE & SHARE

The share link carries the whole panel, including any instrument or dye you added — no account needed to open it.

Good to know

  1. Spillover here is a theoretical estimate from spectra and your filters. Real values also depend on detector voltages and laser power, so compensation always comes from single-stain controls on your instrument; spreading error is not modelled.
  2. Measured spectra: FPbase (CC BY-SA 4.0). Dyes not on FPbase are modelled from their published peak wavelengths.
  3. Instrument presets are published default or core-facility configurations. Facilities often swap filters — check the labels on your instrument and use EDIT FILTERS.
  4. Vendor-neutral: dyes from every supplier are listed side by side; nothing is sponsored. Peak values come from each maker's published tables.
  5. Your panels, instruments and dyes stay in this browser. Clearing site data or switching browsers loses them — export a copy if they matter.
REFERENCE · PANEL DESIGNER

Cytometers with a built-in preset

Each preset is a published default or core-facility configuration, linked to the sheet it was taken from. Any filter can be edited, and you can add your own instrument.

CytometerConfigurationTypeLasersDetectorsSource
BD FACSCanto II4-2-2 (3 lasers, 8 colors)Conventional405 · 488 · 633 nm8config sheet
BD LSRFortessa X-205 lasers UV-V-B-YG-R (example core configuration)Conventional355 · 405 · 488 · 561 · 640 nm17config sheet
BD FACSCelesta3 lasers V-B-YG, 12 colors (example core configuration)Conventional405 · 488 · 561 nm12config sheet
Beckman Coulter CytoFLEX SV4-B2-Y4-R3 (13 colors) (check)Conventional405 · 488 · 561 · 638 nm13config sheet
Thermo Fisher Attune NxT4 lasers V-B-Y-R, 14 colors (default filters)Conventional405 · 488 · 561 · 637 nm14config sheet
Miltenyi MACSQuant Analyzer 103 lasers V-B-R, 8 colorsConventional405 · 488 · 640 nm8config sheet
Cytek Aurora5 lasers 16UV-16V-14B-10YG-8R (spectral)Spectral355 · 405 · 488 · 561 · 640 nm64config sheet
BD FACSLyric3 lasers V·B·R, 12 colors (RUO filter guide)Conventional405 · 488 · 640 nm12config sheet
BD FACSymphony A35 lasers UV·V·B·YG·R, 28 colors (core example)Conventional355 · 405 · 488 · 561 · 637 nm28config sheet
BD Accuri C6 Plus2 lasers B·R, 4 colors (standard)Conventional488 · 640 nm4config sheet
BD FACSAria III5 lasers UV·V·B·YG·R sorter (core example)Conventional355 · 405 · 488 · 561 · 640 nm15config sheet
Beckman Coulter CytoFLEX LX6 lasers NUV·V·B·Y·R·IR, 21 colors (core example)Conventional375 · 405 · 488 · 561 · 638 · 808 nm21config sheet
Cytek Northern Lights3 lasers V16-B14-R8 (spectral) (check)Spectral405 · 488 · 640 nm38config sheet

Presets marked (check) follow the maker's listing, but the filter-to-channel mapping still needs checking against a real instrument.

Fluorochromes in the dye list

199 dyes from every major supplier, side by side — including Brilliant Violet, Brilliant UltraViolet, StarBright, cFluor, Alexa Fluor, NovaFluor, tandem dyes, viability and proliferation dyes, and fluorescent proteins.

Excited byDyesExamples
UV 355 nm24Spark UV 387, cFluor UV395, BUV395, CellTrace Blue, Sirius, cFluor UV440, …
Violet 405 nm59cFluor V420, Alexa Fluor 405, BV421, Super Bright 436, StarBright Violet 440, cFluor V435, …
Blue 488 nm39EGFP, mEmerald, NovaFluor Blue 510, BB515, cFluor B515, Alexa Fluor 488, …
Yellow-green 561 nm40Alexa Fluor 555, NovaFluor Yellow 570, Alexa Fluor 546, cFluor BYG575, PE, CellTrace Yellow, …
Red 640 nm36Alexa Fluor 633, Alexa Fluor 635, cFluor R659, NovaFluor Red 660, APC, CellTrace Far Red, …
808 nm1LIVE/DEAD Fixable Near-IR (876), …

Worked example

Example. On the Thermo Fisher Attune NxT preset (4 lasers, 14 colours), the sample 9-colour T-cell panel puts CD25 on APC (RL1, 670/14) and CD127 on Alexa Fluor 700 (RL2, 720/30). APC spills an estimated 49% of its primary signal into RL2, so the CD127 row is flagged CHECK. SUGGEST then ranks other dyes for that row by detector clash, spill sent and received, and brightness against expression.

LAST UPDATED · HOW VALUES ARE CHECKED · ABOUT LABMATE.TOOLS

QUESTIONS · FLOW CYTOMETRY PANEL DESIGNER

Frequently asked

Does the spillover estimate replace compensation?

No. Spillover here is a theoretical estimate from spectra and your filters. Real values also depend on detector voltages and laser power, so compensation always comes from single-stain controls on your instrument. Spreading error is not modelled.

My cytometer's filters differ from the preset. What can I do?

Facilities often swap filters. Check the labels on your instrument and use EDIT FILTERS, or add your own instrument.

Is the dye list sponsored by a vendor?

No. Dyes from every supplier are listed side by side, with peak values from each maker's published tables. Nothing is sponsored.

Where are my panels saved?

In your browser. Clearing site data or switching browsers loses them, so export a copy if they matter. You can also share a panel by link.

Which cytometers are built in?

BD FACSCanto II, LSRFortessa X-20, FACSCelesta, FACSLyric, FACSymphony A3, Accuri C6 Plus and FACSAria III; Beckman Coulter CytoFLEX S and CytoFLEX LX; Thermo Fisher Attune NxT; Miltenyi MACSQuant Analyzer 10; and the spectral Cytek Aurora and Northern Lights. You can also add your own instrument and filters.

Does it work for spectral cytometers like the Cytek Aurora?

Yes. For spectral instruments it compares each dye's signature across all detectors and shows how similar two dyes are, alongside the estimated spillover.

Where do the dye spectra come from?

Measured spectra from FPbase (CC BY-SA 4.0). Dyes not on FPbase are modelled from their published excitation and emission peaks. About 200 dyes from every major supplier are listed.

Where do the dye brightness values come from?

Built-in values are the vendor's own relative rating, currently the BioLegend Fluorophore Brightness Index (1 = dim, 5 = brightest) for the dyes it lists. Each vendor rates its own conjugates on its own scale, so ratings are not absolute and not comparable one-to-one between vendors; real brightness also changes with instrument, filters, clone and F/P ratio. Hover the DYE 1–5 cell to see the source, or pick a number to use your own rating. Dyes without a published rating show — and SUGGEST says so.

How does SUGGEST pick a fluorochrome?

It ranks up to four dyes for an open row, or one marked CHECK, by detector clash, spill sent and received, brightness against the marker's expression, and how well the instrument excites and detects them. Brightness counts only for dyes with a known value (a few built-in dyes, or your own rating); each suggestion says which it used. The four are alternatives for one row: two that need the same detector are marked as either-or.

01 — INSTRUMENT · YOUR OWN
DETECTION
HOW TO WRITE A FILTER
530/30bandpass, centre/width → 515–545 nm 670LPlongpass, everything above 670 nm 655-730a range, as some makers print it (also for spectral channels)

The label on the filter holder is all you need. Changed one filter on a shared machine? Copy the preset and edit just that line.

Tabs, commas or semicolons all work. Replaces the lasers above.
FLUOR
HOW THE LIST WORKS

Grouped by the laser that excites each dye best, sorted by emission peak. Numbers are excitation / emission peaks in nm.

EM ONLY the maker publishes the emission peak only; the curve is a rougher guess.

MINE a dye you added. It travels with share links and exports.

IN USE already on another row of this panel.

PASTE MARKER LIST

Copy two columns straight from Excel. Fluor names are matched to the list; anything not found is left empty for you to choose.